NVR/Recording Setup/RAID Hotspare

Revision as of 21:04, 25 July 2016 by JP (talk | contribs) (→‎Pre-Requisites)

How to setup Hotspare

Prerequisites

  • An NVR that supports RAID and Hotspare
  • 3 or more hard drives installed on your NVR, including a drive that is not currently part of the RAID array.
  • Completed the instructions to setup RAID Link Here

Step by Step Instructions to Setup Hotspare

1. Login to your NVR from the web interface.

Error creating thumbnail: Unable to save thumbnail to destination

2. Go to Setup->Storage->Advance

Error creating thumbnail: Unable to save thumbnail to destination

3. Select the drive you wish to assign as the Hotspare, and set that drive to "HDD Group 2"

Error creating thumbnail: Unable to save thumbnail to destination

4. Click, "OK"

Error creating thumbnail: Unable to save thumbnail to destination

5. Go to Setup->Storage->RAID->Hotspare

Error creating thumbnail: Unable to save thumbnail to destination
6. Click on the
Error creating thumbnail: Unable to save thumbnail to destination
(pencil) icon.
Error creating thumbnail: Unable to save thumbnail to destination

7. Choose the RAID array you wish to assign the Hotspare drive to, and click, "OK"

Error creating thumbnail: Unable to save thumbnail to destination

8. Click, "OK" again on the confirmation dialogue.

Error creating thumbnail: Unable to save thumbnail to destination

9. Once complete, the drive should be listed under, "Type" as either, "Local Hotspare" or "Remote Hotspare"

Error creating thumbnail: Unable to save thumbnail to destination
Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Recording_Setup/RAID_Hotspare&oldid=13970"