NVRiSettingEvent

NVR Interface-Setting-Event

Video Detect

Motion Detect

Video Loss

Tampering

Alarm

IPC Ext

Alarm Record

1. Before you set alarm setup information, please connect alarm input and alarm output cable (such as light, siren and etc).
2. The record priority is: Alarm>Motion>Regular

In the main menu, from Setting->Event-> Alarm, you can see alarm setup interface. 

• Alarm in: Here is for you to select channel number.
• Event type: There are four types. Local input/network input/IPC external/IPC offline alarm.
  • Local input alarm: The alarm signal system detects from the alarm input port.
  • Network input alarm: It is the alarm signal from the network.
  • IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the local NVR.
  • IPC offline alarm: Once you select this item, system can generate an alarm when the front-end IPC disconnects with the local NVR. The alarm can activate record, PTZ, snapshot and etc. The alarm can last until the IPC and the NVR connection resumes.
• Enable: Please you need to highlight this button to enable current function.
• Type: normal open or normal close.

1. Click Save button to complete alarm setup interface.
2. From Main Menu->Setting->Storage->Schedule
3. Select alarm channel, period and the record type shall be alarm. 
4. Click Copy button to copy current setup to other channel(s).
5. Click OK button to save alarm record information.

Alarm Snapshot

1. From Main menu->Setting->Storage->schedule to enable snapshot function.
2. From Main menu->Setting->Event->Alarm, you can go to Figure 4‑65 to set alarm parameter and enable snapshot function.
3. Click Save button to save alarm snapshot setup.

IPC Offline

Local

Net

Abnormality

HDD

Network

Alarm Out

Alarm Out