NVR/Recording Setup/Alarm Recording Setup SmartPSS 1.6

Revision as of 23:59, 11 October 2017 by Mark (talk | contribs) (Prerequisites)

Description

SmartPSS 1.6 Alarm Setup

Prerequisites

  • A NVR or IP Camera with an Alarm Out
  • Smart PSS 1.16 or 1.161

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG