NVR/Recording Setup/Alarm Recording Setup SmartPSS 1.6

Revision as of 18:53, 12 October 2017 by Mark (talk | contribs) (→‎Step by Step Instructions)

Description

SmartPSS 1.6 Alarm Setup

Prerequisites

  • A NVR or IP Camera with an Alarm Out
  • SmartPSS 1.16 or 1.161

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Log into SmartPSS -> Select Alarm CFG

Alarmsmartpss1 16.png

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Recording_Setup/Alarm_Recording_Setup_SmartPSS_1.6&oldid=27867"