PTZ/SmartPSS 1.16/Scan

Revision as of 22:11, 2 October 2024 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

NOTICE

Notice of Discontinuation of SmartPSS

How to Setup Scan in SmartPSS 1.16

Description

The Scan feature allows you to set a predetermined path from Point A to Point B

Prerequisites

  • Dahua Network PTZ
  • IP Address of Network PTZ
  • SmartPSS 1.16
  • PTZ added to SmartPSS Device List

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

PTZ Scan SmartPSS1.16 1.png

2. Click, "Liveview"

PTZ Scan SmartPSS1.16 2.png

3. Double click the PTZ on the device list on the left, and click the box on the lower left to bring the PTZ up full screen.

PTZ Scan SmartPSS1.16 3.png

4. Click, "More Functions" in the lower left.

PTZ Scan SmartPSS1.16 4.png

5. Click the drop down list, and select, "Scan"

PTZ Scan SmartPSS1.16 5.png

6. Use the left and right arrows to define the left and right limitations for Scan.

PTZ Scan SmartPSS1.16 6.png

7. Click the power icon to start the Scan.

PTZ Scan SmartPSS1.16 7.png