SmartPSS/Add Device P2P

Revision as of 15:19, 3 June 2016 by JP (talk | contribs) (JP moved page SmartPSSAddP2P to SmartPSS/Add Device P2P)

Setup Remote Access via P2P using SmartPSS

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version

SmartPSSP2P1.png

  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

SmartPSSP2P6.png

3. Click, "Devices"

SmartPSSP2P7.png

4. Click, "Manual Add"

SmartPSSP2P8.png

5. Input the following:

  • Device Name:(Any Name)
  • Register Mode: SN
  • SN: (Your Device's Serial)
  • Group Name: (Any Group)
  • User Name: admin
  • Password: admin (Your NVR's Password)

SmartPSSP2P9.png

6. Click, "Get Info"

SmartPSSP2P10.png

7. Click, "Save and Continue"

SmartPSSP2P11.png

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

SmartPSSP2P12.png

Retrieved from "https://DahuaWiki.com/index.php?title=SmartPSS/Add_Device_P2P&oldid=11356"