DSS S2/User Portal/System Settings

How To Set System Settings In DSS User Portal

Description

This article will show you how to set system settings in the DSS Manager Portal

Prerequisites

• DSS
• Computer connected to the same local network / network segment as the server. The default IP address of the server is 192.168.1.108

Video Instructions

Coming Soon

Step by Step Instructions

1. Open a web browser and enter the IP address of the server. Enter the username/password and click Login

2. Click +

3. Click System

3. The system parameters will be displayed

The parameters are explained below:

Message Storage Time Setup

Error creating thumbnail: Unable to save thumbnail to destination

These parameters define the amount of time (in days) the server will keep the information type stored on the server.

• Log
• Alarm Info
• GPS Info
• POS (Point of Sale)
• Passed Vehicle Record
• Access Snapshot Device
• Customer Analysis

Time Sync

Error creating thumbnail: Unable to save thumbnail to destination

Check the box to enable

• Start Time - sets start time of time sync
• Sync Interval - sets a period of time to regularly sync the server time - 2 hours by default. The time between device and server is synchronized via SDK

Click the "Immediately" button to sync time with the device immediately.

Mail Server

Error creating thumbnail: Unable to save thumbnail to destination

Check the box to enable

Set mail server IP, port, encryption type, username/password, sender and test recipient.

Click 'Mail Test' to send a test email from the server

Active Directory

Error creating thumbnail: Unable to save thumbnail to destination

Coming Soon

POS End

Error creating thumbnail: Unable to save thumbnail to destination

Coming Soon