SmartPSS/How To Use PTZ Scan in SmartPSS

Revision as of 22:18, 2 October 2024 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

NOTICE

Notice of Discontinuation of SmartPSS

How To Use PTZ Scan In SmartPSS

Description

This article will show you how to setup and use PTZ Scan in SmartPSS 2.0

Prerequisites

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click 'Live View'

Preset SmartPSS 2.jpg

3. Double Click the PTZ on the device list on the left side of the screen, then double click the video pane to bring the feed up in full screen

Preset SmartPSS 3.jpg

4. Click 'PTZ'

Preset SmartPSS 4.jpg

5. Click 'More Functions' in the lower portion of the screen

Preset SmartPSS 5.jpg

6. Use the drop-down box to select 'Scan'

How To Use PTZ Scan SmartPSS - 1.jpg

7. Use the on-screen controls to move the PTZ to the desired Left position for the Scan.

How To Use PTZ Scan SmartPSS - 2.jpg

8. Click the 'Set Left' icon to save the left position.

How To Use PTZ Scan SmartPSS - 3.jpg

9. Use the on-screen controls to move the PTZ to the desired Right position for the Scan.

How To Use PTZ Scan SmartPSS - 4.jpg

10. Click the 'Set Right' icon to save the right position.

How To Use PTZ Scan SmartPSS - 5.jpg

11. Click 'Start Scan' to begin the scan. The scan will continue until 'End Scan' is clicked.

How To Use PTZ Scan SmartPSS - 6.jpg