:Abandoned Missing Object
Contents
- 1 Abandoned Missing Object
- 1.1 Description
- 1.2 Installation Suggestions
- 1.3 Instructions
- 1.3.1 Description
- 1.3.2 Prerequisites
- 1.3.3 Video Instructions
- 1.3.4 Step By Step Instructions
- 1.3.5 Description
- 1.3.6 Prerequisites
- 1.3.7 Video Instructions
- 1.3.8 Step By Step Instructions
- 1.3.9 Prerequisites
- 1.3.10 Video Instructions
- 1.3.11 Step By Step Instructions
- 1.3.12 Prerequisites
- 1.3.13 Video Instructions
- 1.3.14 Step By Step Instructions
- 1.3.15 Prerequisites
- 1.3.16 Video Instructions
- 1.3.17 Step by Step Instructions
Abandoned Missing Object
Description
Abandoned object/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Installation Suggestions
Instructions
Description
This guide will show how to setup the Abandoned Object / Missing feature at the SystemUI with OldUI
Abandoned object/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Prerequisites
- Dahua device with Abandoned / Missing IVS feature
Video Instructions
Step By Step Instructions
Abandoned
1. From Live View right click to access the menu and select Main Menu
2. Click Event
3. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
4. Click Apply
5. Click IVS
6. Click Add to create a new IVS rule
7. Use the dropdown box to change rule Type to Abandoned
8. Click the Pencil icon under Draw to create the detection zone
9. The video will fullscreen
Left click inside the window to begin drawing the detection zone
10. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
Click OK to save
11. Click Apply to save all settings
Missing
1. From Live View right click to access the menu and select Main Menu
2. Click Event
3. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
4. Click Apply
5. Click IVS
6. Click Add to create a new IVS rule
7. Use the dropdown box to change rule Type to Missing
8. Click the Pencil icon under Draw to create the detection zone
9. The video will fullscreen
Left click inside the window to begin drawing the detection zone
10. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
Click OK to save
11. Click Apply to save all settings
Description
This guide will show how to setup the Abandoned Object / Missing feature at the SystemUI with NewGUI
Abandoned object/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Prerequisites
- Dahua device with Abandoned / Missing IVS feature
Video Instructions
Missing Object
Abandoned Object
Step By Step Instructions
Missing
1. From the Main Menu click AI
2. Click Parameters
3. Click Smart Plan
4. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
5. Click Apply
6. Click IVS
7. Click Add to create a new IVS rule.
8. Use the dropdown box to change rule Type to Missing
9. Click the Pencil icon under Draw to create the detection zone
10. The video will fullscreen
Left click inside the window to begin drawing the detection zone
11. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
Click OK to save
12. Click Apply to save all settings
Abandoned
1. From the Main Menu click AI
2. Click Parameters
3. Click Smart Plan
4. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
5. Click Apply
6. Click IVS
7. Use the dropdown box to change rule Type to Abandoned
8. Click the Pencil icon under Draw to create the detection zone
9. The video will fullscreen
Left click inside the window to begin drawing the detection zone
10. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
Click OK to save
11. Click Apply to save all settings
Application Scene: It can be applied to the scene where the target is sparse and there is no obvious or frequent light change. Missing alarm will increase in the scene where target density is high and there is frequent covering; false alarm will increase in the scene where there are too many people. As for the detection area, it needs to be simple; it is not suitable for the too complicated area.
Description: object abandoned means that it is to detect if there is any object abandoned in the designated detection area and surpass the set time. It will activate record, snapshot and alarm according to the judgment result. Object missing means that it is to detect if there is any object moved in the designated area and surpass the set time. It will activate record, snapshot and alarm according to the judgment result.
Prerequisites
- Dahua device with Abandoned / Missing IVS feature
Video Instructions
Missing Object
Abandoned Object
Step By Step Instructions
1.Log into device using the Web Service.
2.Select Setting -> Event -> IVS.
3. Next to Rule Type click "+" in the new rule that shows below, define the Rule Name and in the drop down select Abandon Object or Missing Object as the rule type. In this example we'll be using Abandon Object.
4. Once the Rule type and name have been set, Define your Keep time (The time it takes until an object is flagged) and whether you want to save a recording/snapshot or have an email notification sent out for it. In this example email and snapshot will be used. For instructions on setting up email functionality see Email Setup
5. By default the rule will be active on a 24/7 basis, if you need to modify the schedule, use the Setup button next to "Working Period" in the window that appears, you can define the time periods (up to 6 per day) for the rule to be active.
6. To define the area of the rule, use "Draw Rule" to set the area; left click and use your mouse to draw your region. Once Finished click save to commit your settings.
This guide will show how to setup the Abandoned Object / Missing feature at the WebUI with NewGUI
Abandoned object/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Prerequisites
Video Instructions
Step By Step Instructions
Abandoned
1. From the Main Menu
Click AI
2. Click Parameters
3. Click Smart Plan
4. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
5. Click OK to save
6. Click IVS
7. Click the + to create a new IVS rule
8. Use the dropdown box to change rule Type to Abandoned
9. Click Draw Rule to create the detection area
10. Left click inside the window to begin drawing the detection zone
11. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
12. Use the Target interface to adjust the Max/Min size for object detection
13. Click OK to save all settings
Missing
1. From the Main Menu
Click AI
2. Click Parameters
3. Click Smart Plan
4. Use the dropdown box to select the channel
Click the IVS icon (Lightbulb) to enable the Smart Plan
5. Click OK to save
6. Click IVS
7. Click the + to create a new IVS rule
8. Use the dropdown box to change rule Type to Missing
9. Click Draw Rule to create the detection area
10. Left click inside the window to begin drawing the detection zone
11. Right click to finish drawing the zone
The Rule name will confirm the rule has been created
12. Click OK to save all settings
This guide will show how to setup the Abandoned Object / Missing feature in SmartPSS
Abandoned object/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Prerequisites
- SmartPSS
- Dahua device with Abandoned / Missing IVS feature (also added to SmartPSS)
- Upgraded devices to latest firmware
Video Instructions
Abandoned
Missing
Step by Step Instructions
1. From the Main Menu of SmartPSS
Click DeviceCFG
2. Select the device from the device tree on the left side of the screen
3. Click the Event section to expand
4. Click Intelligent Analyse
5. Click the IVS icon to enable
Click Next
6. Under Detect Region tab
Use the Re-draw/Delete buttons to create the Detection Zone for the IVS rule. By default it will be the entire frame
7. Under Rule config tab
Click Add Rule
to add a new IVS rule
8. The new rule will appear in the list
Use the dropdown box next to Rule type to select the IVS type - Abandoned Object or Missing Object
9. Left click inside the video frame to begin drawing the detection area
10. Right click to finish drawing the area
11. Click Save