Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Template:IVS Perimeter SystemUI OldGUI

Revision as of 20:10, 4 December 2019 by Marques.Phillips (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

This guide will show how to set up the Perimeter IVS function in the SystemUI with OldGUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Event

Perimeter - SystemUI Old - 1.jpg

2. Click Smart Plan

Perimeter - SystemUI Old - 2.jpg

3. Use the dropdown box to select the channel

Click the IVS icon (light bulb) to enable the function

Perimeter - SystemUI Old - 3.jpg

4. Click Apply to save

Perimeter - SystemUI Old - 4.jpg

5. Click IVS

Perimeter - SystemUI Old - 5.jpg

6. Click Add to create a new IVS rule

Perimeter - SystemUI Old - 6.jpg

7. Click the Pencil icon under Draw to create the rule

Perimeter - SystemUI Old - 7.jpg

8. The video will full screen

Use the AI recognition interface to enable and set which Effective Targets (targets that will be valid)

Click OK

Perimeter - SystemUI Old - 8.jpg

9. To draw the rule left click inside the video frame to begin drawing

Perimeter - SystemUI Old - 9.jpg

10. Right click to finish drawing

The Rule name will confirm when drawing is complete

Perimeter - SystemUI Old - 10.jpg

11. Click Apply to save all settings

Perimeter - SystemUI Old - 11.jpg