Template:Alarm Record WebUI Old

How To Setup Alarm Record

Prerequisites

• Dahua device that supports Alarm Input recording
• Physical alarm devices wired into Dahua devices - How To Connect A Physical Alarm To A Dahua Device

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

2. Connect the cable to your physical alarm.

->

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

4. Login to the NVR, and click, "Setup"

5. Click, "Event"

6. Click, "Alarm"

7. Select the Channel, and enable, "Local Alarm"

8. Select either, "NO" or "NC"

• 

  NO -Normally Open

• 

  NC -Normally Close

9. Next select what actions you want the system to perform, when the alarm is activated.

10. Click, "OK"