Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
PTZ/Instructions/Electronic Image Stabilization EIS
Contents
Electronic Image Stabilization-EIS
Description
Prerequisites
Instructions
WebUI Old
How to Setup EIS via Old WebUI
Prerequisites
- Internet Explorer
Video Instructions
Step by Step Instructions
1. Follow the steps below to enable EIS on the camera.
Setting => Camera => Conditions => Picture => EIS (select the option "On") => Save
SmartPSS
How to Setup EIS via SmartPSS
Prerequisites
- SmartPSS
Video Instructions
Step by Step Instructions
1. Select "Device" to add the PTZ camera.
2. Add the PTZ camera.
3. Go back to main menu and select "Device CFG".
4. Choose the camera to be configured, expand the right arrow, and select "Camera".
5. A pop-up window will appear. Under "Properties" => Camera => Enable "EIS" => Click "Save" to confirm the changes.
6. A pop-up window will appear stating the changes are saved.
DSS Express S
How to Setup EIS via DSS Express S
Prerequisites
- DSS Express S
Video Instructions
Step by Step Instructions
1. After a camera is added, open "Live View" and select the camera.
2. Right click on the camera and select "Device Config".
3. Select "Camera" => Properties => Expand "Image" => Enable EIS => Click "Apply"
4. A pop-up window will appear for the changes.
