Thermal/DH-TPC-HT2201/Instructions/Capture Snapshots Videos
Contents
How to Capture Snapshots and Videos
Description
This article covers how to take snapshots and videos on a DH-TPC-HT2201
Prerequisites
- DH-TPC-HT2201
- A micro SD Card installed and formatted
Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.
Video Instructions
Step by Step Instructions
1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times
2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it.
The snapshot will be accessible from the installed SD Card
3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times
4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up
5. When you are done recording video, pull the trigger 3 times to stop recording
6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it.
The recorded video will be accessible from the installed SD Card
