Alarm Config Settings
Description
Alarms of various types can be setup and configured to respond in different ways when triggered.
| Setting | Description |
|---|---|
| Period | Sets the time and days of the week this alarm can be triggered |
| Post-Record | Sets the amount of seconds that are recorded after the alarm event is done being triggered, if "Record Channel" is enabled |
| Alarm Out | Sets alarm outputs that will be activate when this alarm is triggered > How To Setup Alarm Output |
| Record Channel | Sets which channels are recorded when the alarm is triggered |
| Tour | Enables a tour when the alarm is triggered |
| PTZ Activation | Sets the behavior of a PTZ camera connected to the same recorder when the alarm is triggered > How To Setup PTZ Activation]] |
| Buzzer | Makes the recorder emit an audible beeping noise when the alarm is triggered |
| Alarm Upload | |
| Log | Records the event information in the system log when the alarm is triggered |
| Send Email | Sends an email, via the settings set in the Email section of the Network settings on the recorder, when the alarm is triggered |
