Access Control/How To Setup Date Time ASC1204
Revision as of 02:05, 29 December 2020 by Nicky Gunakan (talk | contribs) (→Step by Step Instruction)
Contents
How to setup or sync access controller date and time
Description
This article is to show you how to sync or setup the time on the access controller device.
Pre-requisites
1. ACS Config Tool.
Click Here To Download ASC Config Tool.2. Computer that connected to the same network as Access Controller
Step by Step Instruction
1. Launch ACS Configtool.
2. Click on Search Settings, and then enter the password of access controller. Click Ok.
3. Go to System Settings.
4. Select the device by putting the checkmark on the device IP address.
5. Set the NTP to the correct time zone.
6. Click Save.
