Template:PTZ Tour WebUI New

How to Setup Tour in Camera OSD

These instructions will show how to set up a Tour for a HDCVI PTZ camera connected to a Dahua XVR through the WebUI of the XVR by bringing up the OSD (On Screen Display) of the PTZ camera directly for configuration.

Prerequisites

• Dahua HDCVI PTZ and XVR
• PTZ Presets created - How To Setup PTZ Presets

Step by Step Instructions

1. Enter the IP of the XVR into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click Live

3. Left click the camera from the channel list on the left side of the screen to load it into live view

4. To open the Camera's OSD - On Screen Display

Click PTZ Menu

Click Open

OSD will appear on screen

5. Use the navigation wheel / arrows to move between menu options. Clicking OK will select the menu option

To create a Tour:

Select Function Setting

Select Tour

Select a Tour number to edit, for example 1

Select Setting

The Tour information will be displayed

Click OK to select a step of the Tour, then change the Preset , Dwell , and Speed settings as desired for each step

Select Exit to exit the menu

How to Setup Tour through XVR

Prerequisites

• Dahua PTZ
• PTZ Presets created - How To Setup PTZ Presets

Step by Step Instructions

1. From Live View

Click PTZ Setup on the right side of the screen

2. Use the dropdown box to select Tour

3. To add steps to the Tour

• Enter the Preset #
• Click Add Preset

Repeat this procedure for every step you wish to add to the Tour

4. To test the created Tour

• Enter the Tour #
• Click Start

5. The Tour will begin and display the current preset/position