Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
IPCZoomandFocus
Zoom and Focus
Note: Only motorized vari-focal devices support focus and zoom function.
|
Parameter |
Function |
|
Zoom |
Adjust the focal length of the lens by clicking or long press “+” or “-“. Speed can be used to adjust the length of one step by single click. Note: After adjusting zoom, the device will focus automatically. |
|
Focus |
Adjust the lens definition by clicking or long pressing “+” “-“. Speed can be used to adjust the length of one step by single click. |
|
Auto Focus |
Click to adjust the image definition automatically. |
|
Reset |
Reset the lens to 0 position, which can be used to remove the accumulative error for the lens. Note: Please reset when adjusting unclear image or using zoom and focus for many times. |
|
Refresh |
After hardware zoom, synchronize the position of lens and dragging block of zoom and focus. |
