NVR/Basic Setup/Initial Setup

Revision as of 16:30, 23 October 2015 by JP (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

File:Standalone_DVR_Quick_Start_Guide_V1.0.0.pdf

Boot up and Shutdown

Boot up

Before the boot up, please make sure:

For device security, please connect the NVR to the power adapter first and then connect the device to the power socket.
The rated input voltage matches the device power on-off button. Please make sure the power wire connection is OK. Then click the power on-off button.
Always use the stable current, if necessary UPS is a best alternative measure.

Please follow the steps listed below to boot up the device.

Connect the device to the monitor and then connect a mouse.
Connect power cable.
Click the power button at the front or rear panel and then boot up the device. After device booted up, the system is in multiple-channel display mode by default.

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Basic_Setup/Initial_Setup&oldid=1627"