Video Intercom/Products/VTO2000A

VTO2000A

Features

• HD CMOS camera
• Stainless steel panel, IP54,IK07
• Night vision &Voice indication
• Video & Audio messaging
• Remote intercom with mobile APP
• Surface mounted & Flush mounted

Firmware Update Instructions

• Instructions for Firmware Update via ConfigTool
• Instructions for Firmware Update via Internet Explorer

Configuration Limitations

• 20 Villa VTO maximum
• 5 VTH maximum
• Push notifications only work if a VTH is added to this device

Password Reset

NOTE: This will only reset the password and not the configurations on the device

• Press on the tamper button five times, you'll hear the tamper siren and a quick beep afterward indicating that the reset was successful

Specifications

Technical Specification
Model	VTO2000A
System
Main Processor	Embedded Micro Processor
Operation System	Embedded LINUX OS
Video
Video Compression	H.264
Image Sensor	1/3” 1.3MP CMOS
Lens	2.8mm
Angle of View	D:120° H:90°
Day/Night	Color Image
Audio
Audio Compression	G.711
Audio Input	Omnidirectional Mic
Audio Output	Built-in Speaker
Bidirectional Talk	Support Dual-way Bidirectional talk
Operation Mode
Keypad	Single Mechanical Button
Interface
Door Control	2(1 relay out for main lock, 1 extended by access control module)
Alarm In	2(1ch unlock button, 1ch feedback)
RS485	1
Network
Ethernet	10M/100Mbps Self-adaptive
Network Protocol	TCP/IP

Ethernet	10M/100Mbps Self-adaptive
Network Protocol	TCP/IP
General
Ingress Protection	IP54, IK07
Tamper Switch	1
Installation	Surface & Flush
Material	Stainless Steel
Power	DC 12V
Power Consumption	Standby ≤1W, Work ≤10W
Working Temperature	﹣40°C~+60°C
Relative Humidity	10%~90%RH
Dimensions	129.9mm×32.2mm×140mm
Weight	0.8Kg