New GUI/AI/Tripwire Setup

Revision as of 17:30, 15 July 2019 by Marques.Phillips (talk | contribs)

How To Setup Tripwire

Description

This article will show you how to setup the tripwire IVS feature on a supported device

Prerequisites

  • Supported device with tripwire feature

Video Instructions

EmbedVideo received the bad id "Coming Soon" for the service "youtube".

Step by Step Instructions

1. Enter the Main Menu

  • Right click at live view then select "Main Menu"

Tripwire Setup - NewGUI - 1.jpg

2. Click Smart Detection

Tripwire Setup - NewGUI - 2.jpg

3. Click Smart Plan

Tripwire Setup - NewGUI - 3.jpg

4. Click to Select IVS (Light Bulb icon)

Tripwire Setup - NewGUI - 4.jpg

When enabled the icon will highlight

Click Apply to save changes

Tripwire Setup - NewGUI - 5.jpg

6. Click Parameters

Tripwire Setup - NewGUI - 6.jpg

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

Tripwire Setup - NewGUI - 7.jpg

8. The created rule will appear in the list

Tripwire Setup - NewGUI - 8.jpg

9. Click the Pencil icon to draw the Tripwire rule

Tripwire Setup - NewGUI - 9.jpg

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

Tripwire Setup - NewGUI - 10.jpg

Tripwire Setup - NewGUI - 11.jpg

11. The Tripwire menu will appear

Tripwire Setup - NewGUI - 12.jpg

  • Name: A name can be applied to the rule
  • Direction: Both, A To B, B To A

Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Tripwire rule is engaged.