Template:Date and Time WebUI New

Revision as of 23:49, 1 November 2019 by Marques.Phillips (talk | contribs)

Set Device Date and Time in WebUI New


Description

This guide shows how to adjust the Device Date & Time and adjust Daylight Savings Time settings for a Dahua device in the new WebUI

Prerequisites

  • Device Web Access and Logins
  • SmartPSS

Video Instructions

Step by Step Instructions 1. Log into the device's WebUI by typing the IP of the device into a web browser and log in using the username/password

Device Date & TIme - WebUI - NewGUI - 1.jpg

2. Click the top left to access the drop-down menu and select 'System'

Device Date & TIme - WebUI - NewGUI - 2.jpg

3. In the General section, click the 'Date & Time' tab

Device Date & TIme - WebUI - NewGUI - 3.jpg

4. The Date & Time interface will be displayed

The System Time can be adjusted by clicking inside the fields. The GMT offset can be adjusted by clicking and using the drop-down box

Device Date & TIme - WebUI - NewGUI - 4.jpg

7. Check the box to enable DST

Use the interface to adjust the Daylight Savings Time settings as desired

Device Date & TIme - WebUI - NewGUI - 5.jpg

  • DST Type - Week or Date.
    • Week - Set DST adjustment for a specific calendar week
    • Day - Set DST adjustment for a specific day

The Start / End Time can be adjusted as desired using the interface

  • Daylight Saving Time starts on the second Sunday in March
  • Daylight Saving Time ends on the first Sunday in November
  • Time is adjusted at 02:00 am local time
  • Time moves forward from 02:00 am > 03:00am at the start of DST
  • Time moves back from 02:00 am to 01:00 am at the end of DST

Device Date & TIme - WebUI - NewGUI - 6.jpg

Device Date & TIme - WebUI - NewGUI - 7.jpg

8. Click 'OK' to save all settings

Device Date & TIme - WebUI - NewGUI - 8.jpg