Template:IVS Perimeter WebUI Old

Revision as of 20:56, 4 December 2019 by Marques.Phillips (talk | contribs)

Description

This guide will show how to set up the Perimeter IVS function in the WebUI with OldGUI

Prerequisites

  • Dahua device with Perimeter IVS function

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Setting

Perimeter - WebUI Old GUI - 1.jpg

2. Under Event

Click Smart Plan

Perimeter - WebUI Old GUI - 2.jpg

3. Click the IVS icon (light bulb) to enable the IVS rule

Perimeter - WebUI Old GUI - 3.jpg

4. Click Save

Perimeter - WebUI Old GUI - 4.jpg

5. Click IVS

Perimeter - WebUI Old GUI - 5.jpg

6. Click the + to create a new IVS rule

Perimeter - WebUI Old GUI - 6.jpg

7. The new IVS rule will appear in the list

Click Draw Rule to draw the IVS rule

Perimeter - WebUI Old GUI - 7.jpg

8. Left click inside the video frame to begin drawing the rule

Perimeter - WebUI Old GUI - 8.jpg

Right click to finish drawing

The Rule name will confirm when drawing is complete

Perimeter - WebUI Old GUI - 9.jpg

Perimeter - WebUI Old GUI - 10.jpg

Perimeter - WebUI Old GUI - 11.jpg