Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:PTZ Pattern SystemUI OldGUI
Contents
How to Setup Pattern
Description
Pattern allows the PTZ camera to move according to a created movement Pattern
This guide will show how to create and run a Pattern using the SystemUI (Old)
Prerequisites
- Dahua Network PTZ
- SmartPSS
Video Instructions
Step by Step Instructions
1. From Live View right click to access the menu
Click PTZ
2. Click the arrow to expand the PTZ menu
3. Click the gear icon to open the settings
4. Click the Pattern tab
5. Enter the Pattern number in the field
6. Click Start to begin creating the Pattern
7. An on screen indicator will appear to show the Pattern Setup status.
Use the onscreen PTZ controls to move the PTZ camera as desired for the pattern
8. The on screen indicator will show the current status of the setup as a percentage.
100% will be the maximum pattern length that can be created
9. Click End to stop creating the Pattern
Right click to exit the PTZ sub menu
10. To run the created Pattern
Enter the Pattern number
Click the Pattern icon
11. The Pattern will begin and display the current status