Template:PTZ Light Wiper MobileUI DMSS

DMSS MobileUI Light Wiper

 NOTE: The Mobile DSS app will only support the Light Wiper if connected directly to the camera via IP/P2P. Wiper commands through the NVR/XVR is not supported as of yet. Support will be added in an upcoming update.

Step by Step Instructions

1. Go to live view on DMSS and click on the "+"

2. Select the PTZ camera

3. On the bottom bar select the Wiper icon

4. Select the Icon below to activate the wiper once OR Select the interval (Seconds) you want the wiper to activate continuously.

or