Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
PTZ/Instructions/Dip Switch Settings
Contents
Dip Switch Settings
Description
The corresponding functions of DIP switch for analog speed dome and HDCVI speed dome are different, which will be respectively introduced below.
- HD-CVI Speed Dome: You can see there are two DIP switches on the PTZ after opening the speed dome, which are
used to set address and baud rate of the speed dome.
- Analog Speed Dome: You can see there are two DIP switches on the PTZ after opening the speed dome, the two DIP
switches are used to set the parameters of address, baud rate and parity.