Template:Alarm Record WebUI Old

Revision as of 21:44, 9 January 2020 by JP (talk | contribs) (Created page with " ===Description=== Connect a physical alarm in conjunction to work with Dahua recording devices. ===Prerequisites=== * A NVR or IP Camera with an Alarm Out file:PhysicalAl...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

Connect a physical alarm in conjunction to work with Dahua recording devices.

Prerequisites

  • A NVR or IP Camera with an Alarm Out

PhysicalAlarmRecordSetup8Large.JPG

  • A low voltage physical alarm

PhysicalAlarmRecordSetup1Large.JPG

  • Dual pair 24 gauge run to the physical alarm

PhysicalAlarmRecordSetup15Large.JPG

  • Alarm block

PhysicalAlarmRecordSetup6Large.JPG

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Login to the NVR, and click, "Setup"

AlarmRecordSetup1.png

5. Click, "Event"

AlarmRecordSetup2.png

6. Click, "Alarm"

AlarmRecordSetup3.png

7. Select the Channel, and enable, "Local Alarm"

AlarmRecordSetup4.png

8. Select either, "NO" or "NC"

  • NO -Normally Open

  • NC -Normally Close

AlarmRecordSetup5.png

9. Next select what actions you want the system to perform, when the alarm is activated.

AlarmRecordSetup6.png

10. Click, "OK"

AlarmRecordSetup7.png

Retrieved from "https://DahuaWiki.com/index.php?title=Template:Alarm_Record_WebUI_Old&oldid=52397"