Template:Motion Record SystemUI NewGUI

Step by Step Instructions

1. From Live View

Right click select Main Menu

2. Click Alarm

3. Click Video Detection > Motion Detect

4. Use the dropdown box to select the channel

Click to toggle and enable motion detect

5. Click the Setting button next to Region to define the parameters of the motion detection

6. The video will fullscreen

Use the on screen interface to adjust parameters of the motion detect:

• Name
• Sensitivity
• Threshold

Left click inside the video frame to set the detection area.

Areas that are colored will be analyzed for motion

Once settings are right click to return to the Motion Detect menu

7. Check the box next to Record Channel to enable recording when motion is detected

Click Setting next to Record Channel

Select which channel(s) to record when Motion is detected

Click OK

8. Enable any desired additional paramters/ alarm linkage for motion detection

9. Click Apply to save all settings

10. Return to the Main Menu

Select Storage

11. Click Schedule

12. Select the Channel using the dropdown box at the top

Click the gear icon to create the record schedule

13. Create the recording schedule using the interface, making sure to check the box for 'MD' (Motion Detect)

Select the days for the schedule

Click OK to save settings

14. The on screen schedule will be updated

15. Click Apply to save

16. Click Record

17. Select 'Auto' for each stream type you wish to record

18. Click Apply to save