FAQ/Change HDCVI Camera Resolution Output via OSD

Title

Prerequisites

• Dahua XVR or DVR
• HDCVI Dahua Camera

NOTE: Output resolution of HDCVI camera must be equal to or less than recorder capabilities to access OSD.

Instructions

WebUI Old

Description

These instructions were written with a C52A2N

Channel 1: 4K (8 MP) at 15 fps or 4 MP at 15 fps

Other Channels: 4 MP at 15 fps or 1080p, 720p, 960H, D1, HD1, BCIF, CIF, QCIF at 30 fps

Prerequisites

• Dahua recorder
• PTZ settings of recorder set to:

Video Instructions

Step by Step Instructions

Change HDCVI Camera Resolution

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Use the device tree on the left to select the camera you wish to configure

Click the camera icon next to the camera/channel and it will load in the main window

3. Click PTZ Menu

4. Click On

5. The camera's OSD menu will appear

6. Use the on screen controls to navigate the menu

7. Under Video Mode

Use the controls to adjust the setting to the desired video mode/resolution

8. Click the center button to confirm the settings change

9. A prompt will appear to confirm

Click the center button to confirm

10. The camera will briefly reboot and then come back in the desired Video Mode

11. Navigate to Exit in the menu to exit the camera's OSD menu

Connect to Other Channel