Thermal/Temperature Monitoring/Initial NVR Setup
Temperature Monitoring Solution Initial NVR Setup
Description
This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update and factory default
Prerequisites
- DHI-NVR5216-16P-I powered and connected to network
- Latest firmware for NVR (see below)
Temperature Monitoring Solution Firmware
| NVR Model | Firmware |
|---|---|
| DHI-NVR5216-16P-I | |
Video Instructions
Step by Step Instructions
Device Initialization
Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
Configure a intrusion rule along obvious perimeters, such as lawns and lakes.
Install cameras at a high position perpendicular to the road to monitor humans and vehicles.
Install cameras at park or garage entrances to detect humans who goes into the motorway or vehicles which goes into a pedestrian area
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
1. Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
Confirm/Upgrade NVR Firmware
