Thermal/Temperature Monitoring/Initial NVR Setup

Revision as of 22:30, 5 May 2020 by Marques.Phillips (talk | contribs) (Edit Network (TCP/IP) Information)

Temperature Monitoring Solution Initial NVR Setup

Description

This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and settign Network information

Prerequisites

  • DHI-NVR5216-16P-I powered and connected to network
  • Latest firmware for NVR (see below)

Temperature Monitoring Solution Firmware

NVR Model Firmware
DHI-NVR5216-16P-I

Video Instructions

Step by Step Instructions

Device Initialization

Confirm/Upgrade NVR Firmware

Factory Default

Resetting the device to Factory Default is recommended after upgrading the Firmware.

Edit Network (TCP/IP) Information

Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR