Thermal/Temperature Monitoring/3rd Party VMS/Milestone/Configure Milestone

Add Camera To Milestone and Configure Alarm Event

Description

This guide will show how to add the camera to the Milestone server and configure the alarm event for Temperature Monitoring

Prerequisites

• Milestone Corporate 2019 R3, device pack 10.8a

Step by Step Instructions

Add device in Milestone XProtect Management Client

1. Add Device to Recording Server by left clicking Recording Servers

Right click the server

Select Add Hardware

2. Select Manual Add

Click Next

3. Click Add

Enter the username and password for the camera

Click Next

4. Select ONVIF for device driver

Click Next

5. Enter the IP address of the camera

Select (Auto-detect)

Click Next

The software will automatically detect the camera

Click Next

Click Next

6. Check the box to enable all Hardware for the camera

Click Next

Click Finish

The camera will appear in the list

Add event in Milestone XProtect Management Client

Add rules for event

Alarm configuration