Thermal/DHI-ASI7213X-T1/Instructions/Update Firmware via USB
Revision as of 20:55, 8 June 2020 by Marques.Phillips (talk | contribs)
Contents
Update Firmware via USB
Update Firmware via WebUI
Prerequisites
- DHI-ASI7213X-T1
- LAN Access from a Windows PC
- Internet Explorer or Chrome
Video Instructions
Step by Step Instructions
Download the firmware files for the device (3 in total):
1. Log into the webUI of the device by typing the IP address into Internet Explorer
2. Click Upgrade
3. Click Browse
4. Select the firmware file, click Open
5. Click Upgrade
A prompt will appear showing the status of the update:
A message will confirm a successful upgrade and the unit will reboot
Repeat the process for all required firmware files
Troubleshooting
In the event the MCU firmware update fails:
- Power down unit
- Reconnect/secure the module
- Power device on
- Attempt Firmware upgrade again
- Make sure the module is properly connected, then attempt the firmware update again
Troubleshooting
In the event the MCU firmware update fails,
make sure the module is properly connected, then attempt the firmware update again
