Video Intercom/SIP 2.0/Stand Alone Multiple VTH and VTO Setup

  UNDER CONSTRUCTION

Please watch the Video Instructions until the Step by Step Instructions are completed, Thank you for your patience

These instructions are for Generation 2, IP-based Video Intercom Devices only.

Icon	Name	Generation	Technology	SIP 2.0	Example Device 1	Example Device 2	Identifying Characteristic	PC Software	Mobile App
	Gen2-SIP2.0-IP	Gen 2	IP	SIP 2.0	VTH1550CH-S	DHI-VTO2000A-S	"-S" at end of model name	DSS or DSS Express S	DSS Mobile for VDP

Stand Alone Multiple VTH and VTO Setup

Description

This guide will show how to setup multiple VTO and VTH devices on a network

In this example a VTO will be designated as the main VTO and also act as the SIP server for the installation

In this example a VTO2202F-P will act as Main VTO and a VTO2111D will act as Sub VTO. The VTH2421FW-P will act as the Main VTO and will send the SIP/VTO information to our extension VTH5221D-S

Prerequisites

• Laptop/PC on the same network
• VDP Config
• Gen2 SIP VTOs and VTHs

Devices

NOTE: These are the device settings we used for this article

Icon	Device	Network Settings	SIP Server Settings	ID No.
	VTO2202F-P	192.168.1.108	Status:Enabled Server IP:192.168.1.108 Server Type:VTO Network Port:5060 Username:8001 Register Password:(Leave Default) Domain:VDP Sip Server Username:admin Sip Server Password:admin123	8001(VTO No)
	VTO2111D_WP-S	192.168.1.110	Status:Disabled Server IP:192.168.1.108 Server Type:VTO Network Port:5060 Username:8002 Register Password:(Leave Default) Domain:VDP Sip Server Username:admin Sip Server Password:admin123	8002(VTO No)
	VTH2421FW-P	192.168.1.155	Server IP:192.168.1.108 Network Port:5060 Username:9901#0 Register Password:(Leave Default) Domain:VDP Sip Server Username:admin Sip Server Password:admin123 Status:Enabled	9901#0 (Room No)
	VTH5221D-S	192.168.1.156	Server IP:192.168.1.108 Network Port:5060 Username:9901#1 Register Password:(Leave Default) Domain:VDP Sip Server Username:admin Sip Server Password:admin123 Status:Enabled	9901#1 (Room No)

Step by Step Instructions

Main VTO Setup (SIP Server)

1. Find the VTO you would like to make the Main

2. Type the IP Address on a browser and setup a password for the VTO. In this tutorial we used admin123

3. Please enter an email in case you lose the admin password

4. Login to the WEBUI using the password you just created

5. First step is to go to "Local Setting"

6. Review the settings and make sure Group Call is enabled

Villa Call No. : This indicates the Room No on the VTH it will reach out too
No. : This number is the VTO Number that can me changed when SIP server is disabled

7. Navigate to over to Network -> SIP Server (You will need to Disable the SIP Server in order to make changes)

SIP Server:

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.