IP Camera/Playback/Playback Menu

Playback Menu

Error creating thumbnail: Unable to save thumbnail to destination

There are four sections:

1: Function of play

2: Playback file

3: Play time cut

4: Record type

5: Progress bar

6: Assistant function

Playback Toolbar

Error creating thumbnail: Unable to save thumbnail to destination

Parameter	Function
1. Play	When you see this button, it means pause or not played record. Click on this button, switch to normal play status.
2. Stop	Click this button to stop playing.
3. Play by frame	Click on this button to go to next frame. Note: You shall pause record when you use this function.
4. Slow	Click on this button to play slowly.
5. Quick	Click on this button to play quickly.
6. Silent	When this button displays, it means audio is silent. Click on this button to switch back to normal.
7. Volume	Click on left mouse to adjust volume.
8. Fisheye	Click this button and fisheye device can adjust display mode according to different installation mode during the process of playback.

Playback Calendar

Error creating thumbnail: Unable to save thumbnail to destination

Parameter	Function
File Type	Select “dav”, as video playback. Select “jpg” as picture playback.
Data Source	Default is SD card.

PLayback Bar

fileIPCPlaybackBar.jpg Step 1. Click on data in blue, time axis displays record file progress bar in color. While, green represents normal record, yellow represents motion detect record, red represents alarm record, and blue represents manual record.

Step 2. Click on certain time on progress bar, playback starts from this time.

Step 3. Click on file list

Error creating thumbnail: Unable to save thumbnail to destination

, select date file will be displayed in list.

Event Bar

Error creating thumbnail: Unable to save thumbnail to destination

Step 4. Double click on file in list, playback this file and display file size, start time and end time.