Access Control/Products/DHI-ASC3202B

Revision as of 00:00, 3 November 2023 by Edward (talk | contribs)

DHI-ASC3202B

DHI-ASC3202B
Specifications Manual Firmware

Build Date: 03-06-2024
DHI-ASC3202B.png
FAQs
Q: Why are my Mifare cards being read as decimal? A: By default the controller will have the card no system set to decimal. In order to change the setting you will need to disable HID support then go to Person Management > Card No. System > Select Hexdecimal
Q: Why don't entries display "User ID" and "Username" when unlocking with PIN codes in DHI-ASC3202B? A: When "PIN Code Authentication" is enabled, it takes precedence over the information displayed in the logs. As a result, the username and user ID are no longer shown, as users no longer need to include the user ID when entering their password.

Wiring Diagrams:

Overview

3202BWiringOverview.png

RS485

3202BRS485Wiring.png

Wiegand

3202BWiegandWiring.png

Accessories

3202BAcessoryWiring.png

Magnetic Locks and Electric Strikes:

Wiring of Dual Magnetic Locks with PoE (12V and Relay)

3202BWiringMagLocksPoE12VRelay.png

Wiring of Dual Magnetic Locks with 12 V External Power Supply (12 V and Relay)

3202BWiringMagLocks12VExternalPower12VRelay.png

Wiring of Dual Magnetic Locks with 12 V External Power Supply (Relay)

3202BWiringMagLocks12VExternalPowerRelay.png

Wiring of 2-in-1 Magnetic Lock with 12 V External Power Supply (Relay)

3202BWiringMagLock12VExternalPowerRelay.png

Wiring of Dual Electric Strikes with PoE

3202BWiringElectricStrikesPoE.png

Wring of Dual Electric Strikes with 12 V External Power Supply

3202BWiringElectricStrikes12VExternalPower.png