Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Troubleshoot/NVR/Video Loss All Cameras

Revision as of 19:39, 6 May 2016 by Mark (talk | contribs) (→‎Video Loss on Multiple Cameras)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Video Loss on Multiple Cameras

There are following possibilities:

Firmware may be old. Please upgrade to the latest version.
Brightness is 0. Please restore factory default setup.
There is no video input signal or it is too weak, due to the length of cable.
Check privacy mask setup or your screen saver.
DVR hardware malfunctions.
Not enough bandwidth.
Insufficient power
Check if you are using You are using aluminum braid or copper braid cable.

Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/Video_Loss_All_Cameras&oldid=10206"

Troubleshoot