Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
SmartPSS/Menu/Device CFG
Contents
SmartPSS Menu-Device Config
Description
The Device Config menu is used to change the settings on IP cameras and NVR's. Follow the instructions below to learn about device configuration through SmartPSS.
Prerequisites
- SmartPSS Installed on computer
- Connected device such as an IP camera or NVR
- Device added onto SmartPSS successfully
Video Instructions
Step by Step Instructions
1. Click the Add Tab and Click Device CFG.
2. On the left column click your designated device to configure.
3. Follow Each section below to access the specific Settings:
Use Device CFG on SmartPSS to configure your devices network, alarm, smart, HDD, account, maintenance, encoding, image, PTZ, video detection, and record settings.
Connect
PPPoE
DDNS
IP Filter
SMTP
FTP
Multicast
Alarm Centre
