Cyber Security/Secure Router or Modem
Contents
How to Create a More Secure Network
Recommended Router Models
- A router with DD-WRT installed. You can locate devices that have DD-WRT support on DD-WRT's website
Notes About DD-WRT
- This software will add many more features to your router, and should only be used by experienced professionals
- Flashing DD-WRT can potentially brick your router, so make sure to follow any instructions carefully
- This guide will not cover all DD-WRT features, only those pertinent to securing your network, and security device
- Menu's might be different in your router depending on your version of DD-WRT
Links and Resources
- DD-WRT Glossary
- DD-WRT FTP
- PuTTY
- MVPs Blacklist
- Ad Blocking DNS
- DD-WRT Ad-Blocking
- Privoxy Setup
- More Info
Setup
Basic Setup
IPV6
DDNS
MAC Address Clone
Advanced Routing
VLANS
Networking
EoIP Tunnel
Wireless
Basic Settings
Radius
Wireless Security
The wireless security settings, in decreasing order of preference, should be the pre-shared key versions of the following: 1. WPA2 + AES
2. WPA + AES (only if all devices support it).
3. WPA + TKIP (maximum security commonly supported by older wireless adapters - can be cracked as well)
4. WEP (easily cracked in 5 minutes)
5. Disabled (no security. Use some other security layer on top, like a VPN)
-Source DD-WRT Wiki
MAC Filter
WL0-Advanced
WL0-WDS
WL1-Advanced
WL1-WDS
Services
Services
FreeRadius
PPPoE Server
VPN
VPN: Definition
A VPN or Virtual Private Network, is used to remotely access your network. This feature will basically allow your computer to remotely connect to your LAN as if that computer was physically on that network.
VPN Configuaration
If you are not using this feature, disable all VPN settings, including:
- IPSec Passthrough
- PPTP Passthrough
- L2TP Passthrough
USB
NAS
Hotspot
SIP Proxy
Adblocking
- Privoxy Basic Configuration
- Link to Setup Ad Blocking on DD-WRT
- Additional Method to Setup Ad Blocking on DD-WRT
- Second Additional Method to Setup Ad Blocking on DD-WRT
Options:
Privoxy: Enable/Disable
Transparent Mode: Enable/Disable
Custom Configuration: Enable/Disable
Recommended Options:
Privoxy: Enable
Transparent Mode: Disable
Custom Configuration: Disable