:PTZ IVS Auto Tracking

PTZ IVS Auto Tracking Setup

Description

• Disclaimer - Auto Tracking and Panoramic view will not work simultaneously

PTZ tracking is an innovative feature that transforms manually controlled PTZ cameras into automated tracking systems that keep an moving object in focus and centered in the frame. It follows the object where stationary cameras would lose the object once out of the fixed cameras field of view.

Prerequisites

• IVS Capable PTZ -Model will end with an, "I" Example: SD6AE230F-HNI

How to Setup Single Scene

Step by Step Instructions

1. Login to your PTZ from the web interface.

2. Click, "Setup"

3. Click, "IVS Setup" and then, "IVS"

4. Check the box for, "IVS Enable" and "Alarm Track Enable" Then click, "Save"

5. Click, "Scene Setup"

6. Position the PTZ, click, "Add Scene" and then, "Save"

7. Click, "Rule Setup"

8. Click, "Add Rule"

9. Click the rule under, "Rule Type" and select the type of rule you wish to create. For this example we used, "Intrusion"

10. Click the image icon under, "Draw"

11. Draw the rule on the feed to the left.

12. Next to, "Target Filter" click, "Draw"

13. Create a box for the maximum (Yellow box), and the minimum (Red box) size that an object needs to be to detect.

14. Click, "Save"

15. Click, "Parameter"

16. Select, "Compromise Mode" under, "Detect Balance"

17. Click, "Add Detect Region"

18. Draw a box around the area you are to enable for the detect region, and click "Save"

How to Setup Multi Scene for SmartPSS 1.16

Prerequisites

• SmartPSS version 1.16
• PTZ connected to the network

Step by Step Instructions

1. From the home menu select live view.

2. From the right hand side select to highlight the PTZ device -> Right click on highlighted PTZ -> IVS Config

800px