NVR/Recording Setup/Alarm Recording Setup SmartPSS 2.0

Revision as of 22:50, 12 October 2017 by Mark (talk | contribs) (Created page with "==How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0== ===Description=== How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0 ===Step by St...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0

Description

How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG