SmartPSS/How To Enable Task

Revision as of 18:06, 27 March 2019 by Marques.Phillips (talk | contribs) (How To Enable Task In SmartPSS)

How To Enable Task In SmartPSS

Description

This article will show you how enable configured tours manually or by schedule using SmartPSS

Prerequisites

Video Instructions

Coming Soon

Step by Step Instructions

Manual Tour

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click 'Live View'

Preset SmartPSS 2.jpg

3. Use the drop down box to select the Tour, then click 'Start Tour'

How To Use Task Plan - 17.jpg

4. The tour will continue to run until 'Stop Tour' is clicked.

How To Use Task Plan - 19.jpg


Schedule Tour

1. Launch SmartPSS and select 'Tour & Task'.

How To Use Task Plan - 1.jpg

2. Click 'Scheduled Tour Setting' to open the menu

How To Enable Task - 1.jpg

3. Use the menu to configure the schedule.

How To Enable Task - 2.jpg

  • Device Type¹ - Select from a single day or a week schedule option
  • Task Plan² - Task the schedule is being created for
  • Start/End Time³ - Enter a Start Time and End Time for the schedule, in military time

For Week Plan options, Use the tabs above the table to select which day to add the schedule to.

Click 'Add' to add the time to the schedule.

Click 'Save' once you have completed the schedule.