SmartPSS/Add Device P2P

Setup Remote Access via P2P using SmartPSS

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

• SmartPSS
  SmartPSS Download
  How to Install SmartPSS
• SN Number of device located on bottom of device recorder. Can also be located from the local menu of the recorder under menu -> system info or from Dahua Web service under Setup -> Network -> P2P
• P2P must be enabled from the main menu of the recorder under Settings -> Network -> P2P or from Dahua Web Service under Setup -> Network -> P2P.

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

• 

  On the underside or side of the unit

• 

  In the web interface, under Info->Version

• 

  On the system interface under Main Menu->Settings->Network->P2P

• 

  On the system interface under Main Menu->Info->System->Version

2. Launch SmartPSS. At the main page click Devices

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

Error creating thumbnail: Unable to save thumbnail to destination

3. Click, "Devices"

4. Click, "Manual Add"

5. Input the following:

• Device Name:(Any Name)
• Register Mode: SN
• SN: (Your Device's Serial)
• Group Name: (Any Group)
• User Name: admin
• Password: admin (Your NVR's Password)

Error creating thumbnail: Unable to save thumbnail to destination

6. Click, "Get Info"

Error creating thumbnail: Unable to save thumbnail to destination

7. Click, "Save and Continue"

Error creating thumbnail: Unable to save thumbnail to destination

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

Links

Related Articles in Category:SmartPSS
<DynamicPageList> category = SmartPSS count=5 </DynamicPageList>	<DynamicPageList> category = SmartPSS offset = 5 count= 5 </DynamicPageList>	<DynamicPageList> category = SmartPSS offset = 10 count=5 </DynamicPageList>

Related Articles in Category:P2P
<DynamicPageList> category = P2P count=5 </DynamicPageList>