Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
DSS Windows/Express/Mobile Access via DSS Mobile2
Revision as of 17:15, 25 October 2019 by Marques.Phillips (talk | contribs) (→Step by Step Instructions)
Contents
Mobile Access via DSS Mobile 2 Setup
Description
This article will show you how to setup remote access to DSS Express S via mobile device.
Prerequisites
- DSS Express S Server Installed
- DSS Express S Client Installed
- DSS Express S Remote Access via Portforwarding (Required for WAN or remote access)
- DSS Express S Server information - IP, Port, Username / Password
- DSS Mobile2 for Android or DSS Mobile2 for iOS
Video Instructions
Step by Step Instructions
1. Open DSS Mobile 2 and login using the unit's information:
- IP address
- port (default 443)
Tap Next Step
2. Enter the log in information for the server:
- username: system (default)
- password: password
Tap Log In
2. Once the device is successfully connected , the below screen should be displayed.
