Template:IVS Intrusion SmartPSS
Description
This guide will show how to setup the Intrusion IVS feature in SmartPSS
Prerequisites
- Dahua device with Intrusion IVS feature (added to SmartPSS)
Video Instructions
Step by Step Instructions
1, From the Main Menu of SmartPSS
Click Device CFG
2. Click to select the device from the device tree on the left
3. Click to expand Event
4. Click Intelligent Analyse
5. Confirm the preset (if required)
Click Next
6. Use the dropdown box to select the channel/preset
Click to select the IVS icon
7. Click Next
8. Under Detect Region
The detection zone can be configured, by default it will be the entire video frame
9. Under Rule config
Click Add rule to create a new IVS rule
10. Use the dropdown box to change Rule type to Intrusion
11. Left click inside the video frame to begin drawing the IVS rule
Right click to finish drawing, a prompt will confirm when the rule has been created
12. Click Config to make additional parameters adjustments
13. Under Parameters
- Action List
- Appear - Alarm is triggered when the target appears in the designated area and within the alarm time
- Cross - Alarm is triggered when the target crosses (enter or exists) the area in the designated area and within the alarm time
- Direction
14. Under Arming Schedule, the schedule for the rule can be created, by default it will be 24/7
15. Under Alarm, the various triggers for when the rule is triggered can be configured
Click Save
16. Click Save to save all settings