Template:IVS Scene Change SystemUI OldGUI
Revision as of 17:37, 9 December 2019 by Marques.Phillips (talk | contribs)
Description
This guide will show how to setup the Scene Change IVS feature at the SystemUI with OldGUI
Prerequisites
- Dahua device with Scene Change IVS feature
Video Instructions
Step By Step Instructions
1. From the Main Menu
Click Event
2. Under Video Detection
Click Scene Change
3. Use the dropdown box to select the channel
Check the box to enable the Scene Change feature
4. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)
5. Click Apply to save all settings
