Template:IVS Scene Change WebUI Old
Revision as of 18:52, 9 December 2019 by Marques.Phillips (talk | contribs)
Description
This guide will show how to setup the Scene Change IVS feature at the WebUI with OldGUI
Prerequisites
- Dahua device with Scene Change IVS feature
Video Instructions
Step By Step Instructions
1. From the Main Page of the WebUI
Click Setting
2. Click Event
3. Click Video Detection
4. Click Scene Changing
5. Check the box to enable the IVS feature
6. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)
7. Click Save to save all settings
