TestPage
Revision as of 16:16, 7 October 2015 by JP (talk | contribs) (Created page with "[[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]]== CD-ROM Installation == Please follow the steps listed below....")
[[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]]== CD-ROM Installation == Please follow the steps listed below.
| [[Image:]] | [[Image:]]
|
| # Open top cover and then remove the HDD bracket
|
# Take off the bottom of the HDD bracket and CD-ROM bracket.
|
| [[Image:]] | [[Image:]]
|
| # Fix the CD-ROM bracket at the HDD bracket.
|
# Install a pair of the CD-ROM bracket. Please make sure the reverse side is secure too.
|
| [[Image:]] | [[Image:]] |
| # Install SATA burner. Line up the SATA burner to the hole positions.
|
# User screwdriver to fix the screws.
|
| [[Image:]] | [[Image:]] |
| # Put the bracket back. Please adjust the CD-ROM to the proper position so that the button of the front panel is directly facing the pop-up button of the CD-ROM.
|
# Connect the SATA cable and power wire.
|
| [[Image:]] | |
| # Secure the HDD bracket and put the top cover back.
|
