Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:Email Notifications SystemUI NewGUI
Email Notifications
Prerequisites
- A new throw-away sender email account that can be replaced
- A recipient email account
- An event set up to trigger the email alert
- NVR or HCVR with an internet connection
Video Instructions
Step by Step Instructions
1. From Live View
Right click select Main Menu
2. Click Network
3. Click Email
4. Click the toggle button to enable the Email feature
5. Enter all information for the SMTP Server being used:
- SMTP Server
- Port
- Username - full email address (including @___.com)
- Password - password for email account being used
- Anonymous - toggle to send the email as Anonymous (Email server must support this)
6. Enter information for the Email that will be sent out
- Receiver - select the Receiver #
- Email Address - enter the full email address that will receive the email
- Sender - enter the full email address that is sending email
- Subject -
- Attachment
- Encryption Type
7. Use the dropdown box next to Receiver to select the Receiver #
8. Enter the full email address that will receive notifications
9. Enter information for Sender, which will be the email address sending the notification
10. Enter a Subject for the email
11. Toggle the switch next to Attachment to allow an attachment to also be sent with the notification
12. Use the dropdown box to select the Encryption Type for the email server being used
13. Configure additional parameters for Email Notifications as desired:
- Health Enable
- Interval
14. Click Apply to save
