Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Template:SMD WebUI Old

Revision as of 21:42, 23 January 2020 by Carlos (talk | contribs) (→‎Prerequisites)

Prerequisites

Video Instructions

How to Setup SMD using the WebUI Old

Step by Step Instructions

Prerequisites

  • WebUI Old.

1. Login.
O WUI1.JPG


2. Go to the "Setting" tab.
O WUI2.JPG


3. Go to motion detection tab, "Event"
O WUI3.JPG


4. Check the Enable box, choose the area and click on "Save"
O WUI4.JPG


5. Go the "SMD Setup" tab
O WUI5.JPG


6. Check the Enable box, choose the area and click on "Save"
O WUI6.JPG


7. Check the Enable box for either "Human" or "Motor Vehicle"
O WUI7.JPG

8. Check the "Save" button.
O WUI8.JPG

Retrieved from "https://DahuaWiki.com/index.php?title=Template:SMD_WebUI_Old&oldid=53145"