Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:SMD SystemUI NewGUI
Prerequisites
- Dahua device that supports SMD
Video Instructions
Step by Step Instructions
1. From Live View
Right click select Main Menu
2. Click Storage
3. Confirm the recorder is set to motion detection recording
Click Schedule
Review the on screen schedule, make sure motion detection (MD) is enabled
4. Click Record
Confirm the record settings are enabled for the desired streams
Right click to return to the Main Menu
5. Click Alarm
6. Click Video Detection
7. Motion Detect
Use the dropdown to select the channel
Click to toggle and enable the Motion detection for this channel
8. Click Apply to save
Right click to return to the Main Menu
9. Click AI
10. Click Parameters > SMD
11. Use the dropdown box to select the channel
Click to toggle and enable the SMD for this channel
12. Use the additional options to configure the parameters of SMD:
- Sensitivity
- Effective Target - Human, Vehicle, or Both
13. Click Apply to save
